Finnleo Designer 60B Sauna Heater
The Finnleo Designer 60B sauna heater is a 6 kilowatt sauna heater built for indoor use. The 60B runs off of single phase, 240 volt power. Every heater in the Finnleo Designer B series utilize knob style controls to control the sauna heater.
All Finnleo Sauna Heaters built after 2022 come with an industry leading 5 year warranty.
| Finnleo Designer 60B Quick Specs | |
| Cubic Ft Heating Capacity | 175-310 |
| Power | Single Phase |
| Volts | 240 V |
| Kilowatts | 6 kW |
| Watts | 6,000 Watts |
| Amps | 25 amps |
| Control Style | Knob Controls |
| Dimensions (W x H x D) | 16.5″ x 23″ x 11″ |
| Weight | 33 lbs. |
Description
Meet The Finnleo Designer 60B Sauna Heater
The Designer 60B Sauna Heater is a mid range sauna heater in the Finnleo Designer B series. The Designer 60B model uses 240 volt power to heat the sauna. This model is a 6kw sauna heater, meaning it takes 6,000 watts to run the heater itself. All models in the Designer B Series can be pre-programmed to turn on up to 9 hours later simply by turning the dial to 9.
We measure our heater capabilities by cubic feet. To determine the cubic feet of your room, use either method below.
- Cubic ft of square or rectangle sauna room: length (in feet) times width (in feet) times height (in feet).
- Cubic ft of cylinder sauna room: length (in feet) times diameter width (in feet) times 3.14 (pi).
Finnleo Designer 60B Sauna Heater Advanced Specs:
- Minimum cubic feet Sauna Room: 175 cubic feet
- Maximum cubic feet Sauna Room: 310 cubic feet
- Watts: 6,000
- Pounds of Sauna Rock: 25 lbs.
- Voltage: 240
- Phase: 1
- Amps: 25
- Minimum Wire Size from Breaker to Contactor Box: 2 #10AWG+G
- Wire from Contactor Box To Heater: N/A (controls in Designer B Series built in)
- Heater Shipping Weight: 33 lbs.
- Mounting Method: Wall mounted
- Contactor Box Required: No
- Indoor / Outdoor Capability: Indoor only
- Dimensions (Width x Height x Depth): 16.5″ x 23″ x 11″
Every Finnleo Sauna heater purchased from Sauna Supply Company is covered under a 5 year warranty.
Order Replacement Parts for Finnleo Designer 60B Sauna Heater
Replacement Parts for Finnleo Designer 60B Sauna Heater Model Number: 1712-60-17
To order replacement parts, please call (763)688-1488.
| Finnleo Designer 60B Replacement Parts | |
| Model #: 1712-60-17 | |
| Part Description | Part Number |
| Designer Heater Shroud | 8012-506 |
| Heater Supports 6.0 kW | 8250-060 |
| Rock Grate | 8019-209 |
| Rock Cage | 8019-500 |
| Capilary Holder | N/A |
| Heater Cap | 8012-450 |
| High Limit Switch | 3119-510 |
| Contactor | 3131-517 |
| Timer | 3140-504 |
| Thermostat Control | 3155-622 |
| Control Hole – Cover | N/A |
| Terminal Block | 2100-550 |
| Lower Heater Cap | 8012-445 |
| Electrical Enclosure Cover | N/A |
| Element Seals | 8855-10 |
| Control Knobs | 2140-500 |
| Element: SEPC 64 240 V (Qty 3.) | 3001-703 |
If you are in need of replacement parts for the Finnleo Designer 60B sauna heater model # 1712-60-17, please give us a call at (763)688-1488 or contact us online. We are happy to assist you with any order, no matter how small it may be.
Sauna Rock Guidelines for the Finnleo Designer 60B Sauna Heater
Take caution not to bend heater elements while placing rocks in your new sauna heater. Rocks should loosely cover the tops of your elements by 2-3″.
While placing rocks in your sauna heater all follows the same general guidelines, refer to our sauna rock replacement guide for advanced guidance on filling your heater with rocks.
