The Finnleo Designer 80B sauna heater is an 8 kilowatt sauna heater built for indoor use. The 80B runs off of single phase, 240 volt power. Every heater in the Finnleo Designer B series uses knob style controls to control the sauna heater.
All Finnleo Sauna Heaters built after 2022 come with an industry leading 5 year warranty.
Finnleo Designer 80B Quick Specs | |
Cubic Ft Heating Capacity | 250-425 |
Power | Single Phase |
Volts | 240 V |
Kilowatts | 8 kW |
Watts | 8000 watts |
Amps | 33.3 amps |
Control Style | Knob Controls |
Dimensions (W x H x D) | 16.5″ x 23″ x 11″ |
Weight | 35 lbs. |
The heater capable of heating the largest room in the Finnleo Designer B series, this model uses 240 volt power to heat the sauna. This model is an 8kw sauna heater, meaning it takes 8,000 watts to run the heater itself. All models in the Designer B Series can be pre-programmed to turn on up to 9 hours later simply by turning the dial to 9.
We measure our heater capabilities by cubic feet. To determine the cubic feet of your room, use either method below.
Every Finnleo Sauna heater purchased from Sauna Supply Company is covered under a 5 year warranty.
Replacement Parts for Finnleo Designer 80B Sauna Heater Model Number: 1712-80-17
To order replacement parts, please call (320)980-0760.
Finnleo Designer 80B Replacement Parts | |
Model #: 1712-80-17 | |
Part Description | Part Number |
Designer Heater Shroud | 8012-506 |
Heater Supports 8.0 kW | 8250-080 |
Rock Grate | 8019-209 |
Rock Cage | 8019-500 |
Capilary Holder | N/A |
Heater Cap | 8012-450 |
High Limit Switch | 3119-510 |
Contactor | 3131-517 |
Timer | 3140-504 |
Thermostat Control | 3155-622 |
Control Hole – Cover | N/A |
Terminal Block | 2100-550 |
Lower Heater Cap | 8012-445 |
Electrical Enclosure Cover | N/A |
Element Seals | 8855-10 |
Control Knobs | 2140-500 |
Element: SEPC 65 240 V (Qty. 3) | 3001-705 |
If you are in need of replacement parts for the Finnleo Designer 80B sauna heater model # 1712-80-17, please give us a call at (320)980-0760 or contact us online. We are happy to assist you with any order, no matter how small it may be.
Sauna Rock Guidelines for the Finnleo Designer 80B Sauna Heater
Take caution not to bend heater elements while placing rocks in your new sauna heater. Rocks should loosely cover the tops of your elements by 2-3″.
While placing rocks in your sauna heater all follows the same general guidelines, refer to our sauna rock replacement guide for advanced guidance on filling your heater with rocks.
Let’s Build Your Dream Sauna.
500 Cokato St W Suite #4,
Cokato, Minnesota 55321
Monday – Friday: 8AM-5PM
Saturday: 9AM-12PM
*Holiday Hours May Vary – View Our Google Business Profile For The Latest Hours.
After hours appointments available, please call to schedule.
Our response times are quick. A team member will reach out to you after you submit the form!